The Short Barrel Project

[Altec]

Did a little work on one of my projects. Milled a CCM frame to fit, then made a new RVA to go with it.

Next is to modify a Phantom VA for it, make a adapter block to turn the side tap into a 1/8NPT (Yes I realize I could tap the body). Then maybe take steps to make it run on Liquid Co2, and do something with the pump and bolt.

http://i13.photobucket.com/albums/a269/Mrjunior/100_4077.jpg
http://i13.photobucket.com/albums/a269/Mrjunior/100_4079.jpg
http://i13.photobucket.com/albums/a269/Mrjunior/100_4078.jpg
http://i13.photobucket.com/albums/a269/Mrjunior/100_4080.jpg

[tymcneer]

Looking good... Keep on making good stuff, and you'll be in business for yourself!

Ty

[senghing27]

OMFG.... That looks so nice with the S6 frame on there...

VSC setup from a phantom would be nice, but would you have enough room to mount the VA on the trigger guard of the S6 frame?

Tapping the body and have a vert adaptor there would be the easiest I would thing, and would look pretty sharp on that there.

[Altec]

Thanks. Its also super comfy. I should be able to aim the marker now! :banana:

The VA was a crap shoot when I ordered it. It ended up fitting perfect besides the angle on the trigger guard being slightly different. So the VA sticks the tank about 2* forward. I just have to do some slight milling to fix that though.

As far as using a body mounted VA, I could, but I just don't think it would leave as clean of a look.

[senghing27]

Crapshoot as Dead on Arrival?

[Altec]

Um, no. As in the game of luck.

[Altec]

Got the VA on. Ran into a little problem though. Since I didn't check how deep I can cut, I made a nice little window about the thickness of a finger nail right into the ASA area. Whoops! So now I need to pick up another VA. This time I may not cut the ASA at all, but instead make a wedge to go between the VA, and frame to make the tank sit straight.

http://i13.photobucket.com/albums/a269/Mrjunior/100_4082.jpg

[SummaryJudgement]

That frame does look really nice on there.:wthumpup: