Solenoid for E1

[SocialD]

Does anyone know where to get a pancake solenoid, not the pneumatic 4-way, for an E1? Is there some generic solenoid that will work?

Thanks,
-D

[BigEvil]

The 9v pancake noids are basically the same. Do you need to specifically replace an e1 noid or are you using it in something custom?

Talk to Jim@Ape, aka Diveanx here on PBL. They have that noid they sell separately for their tippman kits.

[SocialD]

It is actually for an E1. I have a leftover solenoid from a hyperframe. I wonder if that will work.

[BigEvil]

It is actually for an E1. I have a leftover solenoid from a hyperframe. I wonder if that will work.


It should. You "MIGHT" have to swap the plungers and change the connector.

[p8ntbal4me]

Does anyone know where to get a pancake solenoid, not the pneumatic 4-way, for an E1? Is there some generic solenoid that will work?

Thanks,
-D

First,.. book mark this thread as it is only going to get MUCH bigger with time! (http://www.pblegion.com/showthread.php?t=861)

Second,... you need this noid:

Emessem 9954/0312 9VDC-PD

Ordering that EXACT part will give you the correct noid coil, pin length, wire leads, and connector to your E1/E2 board.

Your Welcome!:wthumpup:

~ P8nt

[SocialD]

Awesome! Part numbers and everything!:clap: Thanks guys!

Okay, what is MSA?

[p8ntbal4me]

MSA = Magnetic Sultz of America

,... read that big information post I told you to bookmark a few times so you can find your way around when dealing with these guys,... they like people to KNOW what they want when they pick up the phone.

Same goes for SMC

~ P8nt