Removing Dye Sticky Grip

[georgeyew]

I have a very simple question (probably for most of you). I have a Intelliframe with the wrap around Dye Sticky Grip. What is the easiest way to remove it since the lower part goes all the way way around the grip? I am in the office and have now way to play around with it. I was just seeing if someone could tell me real quick.

[babyface]

unscrew all screws and pull out from the bottom first toward th front of the gun.

[TakenOutTheTrash]

I find that wiggling it back and forth helps also.

Thanks,
David

[Altec]

If you are talking about the later model ones with more of a sleeve shape, and assuming you have a bottom line setup. Take the four screws out, and pop the airline off. Then continue to work the grips around until they slide off.

[georgeyew]

Thanks everyone for your replies. I have a fairly large ASA, so it would take some effort to get the grip over the ASA. I just hope that I don't have to take the ASA off everytime I need to clean the grip.

[mongoose]

Thanks everyone for your replies. I have a fairly large ASA, so it would take some effort to get the grip over the ASA. I just hope that I don't have to take the ASA off everytime I need to clean the grip.

you might...other then that they are great grips

[ChrisChoi]

You might as well just take the time to take it all apart. It doesn't take long once you get used to it.