My Fleet - P8ntbal4me's Gats

[p8ntbal4me]

Heres all the goodness I have to offer your eyes.
Im adding as I get them so keep a lookout!

My NEW Gloss Black X-Mag (purchased from "Thotograph")
http://img2.putfile.com/thumb/1/1700090524.jpg (http://www.putfile.com/pic.php?img=7506358)
http://img2.putfile.com/thumb/1/1700090551.jpg (http://www.putfile.com/pic.php?img=7506353)
http://img2.putfile.com/thumb/1/1700090598.jpg (http://www.putfile.com/pic.php?img=7506356)

The Shark Attack X-Mag (the one signed by Tom) (puchased from "Summary Judgement")
http://img2.putfile.com/thumb/12/35602092892.jpg (http://www.putfile.com/pic.php?img=7334498)
http://img2.putfile.com/thumb/12/35602092890.jpg (http://www.putfile.com/pic.php?img=7334501)
http://img2.putfile.com/thumb/12/35602092833.jpg (http://www.putfile.com/pic.php?img=7334502)

My Gloss Black Karta Mag w/ Logic UMF (puchased from "going_home")
http://img1.putfile.com/thumb/3/6320415837.jpg (http://www.putfile.com/pic.php?img=4917385)

My Gloss Red Chord V2 Mag (puchased from "going_home")
http://img1.putfile.com/thumb/3/6320432660.jpg (http://www.putfile.com/pic.php?img=4917472)

The Twisted Reflex Cocker (built by Boston Paintball Supply)
http://img1.putfile.com/thumb/1/2417154658.jpg (http://www.putfile.com/pic.php?img=4598373)
http://img1.putfile.com/thumb/1/2417154696.jpg (http://www.putfile.com/pic.php?img=4598372)

[p8ntbal4me]

Reserved for the Angels

[p8ntbal4me]

Reserved for the cockers

[p8ntbal4me]

Reserved for the guns that I cant list the names of cause the filter will edit the names anyway

[p8ntbal4me]

space reserved 4

[AirAssault]

Very nice, but for the love of god can we not call paint ball markers "gats".

[p8ntbal4me]

Very nice, but for the love of god can we not call paint ball markers "gats".

Note the change.

~ P8nt

[MadMarx]

Where's the Micro E?

[Altec]

Love the Reflex. I've been wanting one forever.

[p8ntbal4me]

Where's the Micro E?

I dont have good solo photos of them,... the Chrome one is in pieces and is being cleaned and lubed,...

The red one was used last night and she needs to be re-cleaned again.

The blue one is in one piece, clean, and ready for pictures.

~ P8nt

[nmib]

you bought Thotograph's x-mag???

sweetness. its a great marker. youll be every happy!

[p8ntbal4me]

you bought Thotograph's x-mag???

sweetness. its a great marker. youll be every happy!

Yep. Its a nice one!:clap:

I think it took 9 hours to complete the transaction (from my reply to him shipping it out the door):cheers:

He'll get to use it at Tunaball:wthumpup:

~ P8nt

[Mechanic79]

Nice collection! and Tom's signature........
:clap:

[SummaryJudgement]

Hotness, of course!

:cheers:

[IronHyde]

That shark attack is sweet.

Looks like you like how Going_Home builds his mags. I do as well.

[warbeak2099]

May I ask what's going on inside the grip of the green cocker? What is that pneumatic hose going into the gripframe from the frontblock all about?

[p8ntbal4me]

You know how Tippmann does their little "R/T" kits?

Say hello to the gun that started that all,.... the Boston Paintball Supply Reflex kit.

There is a ram behind the trigger that pushes it forward after it cycles on return stroke.

It uses a longer cocking ram to add time to the cycle and on the cocking ram is a needle valve that controls the BPS.

I bought this kit in 1997 when Boston was showing it at the Big Game @ Canobie Paintball in Windham, NH.

I held onto it out of sheer luck and in 2001, I had them build me a cocker (what you see there) and put the kit on it.

When I say its a 1 of 1,.... it really is.:wthumpup:

~ P8nt

[wolf13]

Ah, nice to see another reflex kit:cheers:

[tymcneer]

Hmmm... how about a Reflex'd pneumatic assist sniper... That would prove... interesting...

Can we get some closeups of the front block area? I am interested in how Boston PB made it work.

Ty

[p8ntbal4me]

Completely possible!

Really the Reflex kit works off the return stroke on the ram so all that would do is as the pneumatic assisted pump was on its return,.. it would speed up.

If you could figure out the auto-trigger,.. then you would have semi-auto R/T action!

Ohhhhhhh lets build one of those Ty!!!!!!!

New ideas!

~ P8nt

[tymcneer]

Get me some nice clear pictures, and we can try to work something out... It could prove interesting :evillaugh:

Ty

[p8ntbal4me]

Ill do you one better than that.

I have the schematics on the whole thing somewhere:wthumpup:

~ P8nt

[tymcneer]

Now that would be a useful piece of information. You might want to scan and post those, for posterity, so the information isn't lost to the world.

I've been working on a PA pump, but the body I'm using is one of the Powerlyte Hybrids. The ram is built into the body, and I want to sink the 3/4 way into the body, and route all of the lines internally. In addition, I want to try and run it on very low pressure, so I will not need an LPR. Should prove interesting. I'm lucky enough to have Altec helping me with the project.

Maybe we need to have a brainstorming session. :evillaugh:

Ty

[Ruler_Mark]

thotograph's guns do not dissapoint. :cheers:

[p8ntbal4me]

Now that would be a useful piece of information. You might want to scan and post those, for posterity, so the information isn't lost to the world.

I've been working on a PA pump, but the body I'm using is one of the Powerlyte Hybrids. The ram is built into the body, and I want to sink the 3/4 way into the body, and route all of the lines internally. In addition, I want to try and run it on very low pressure, so I will not need an LPR. Should prove interesting. I'm lucky enough to have Altec helping me with the project.

Maybe we need to have a brainstorming session. :evillaugh:

Ty

So you kinda want to do what palmer did to the newer blazers and build it into the body? His first run didnt do this though.

The easiest way to do this little project would be to get a PA cocker,.. then reverse it but put the reg on the right side freeing the left for the ram and other possibles.

Ive always wanted to use a trigger frame for the pump on the PA. How awesome would that be to have to pull the forward trigger to pump it,.. then pull another trigger to fire? You could fire that thing and keep a damn close beed on your last shot without having to worry about the pumping causing barrel drift off target.

Take it another step and use 2 e-blade frames,.. lol!

Im writting this stuff down!!!!:evillaugh:

~ P8nt

[tymcneer]

Ok, so the pump needs to be a staionary grip with a single trigger to actuate the 3/4 way, and then the regular trigger that will "RT" when the pump trigger is activated... sounds like a semi, with a weird two finger safety to me... Let's build one! The Reflex is interesting, because the Powerlyte body I have cannot be converted into a regular sniper, easily... Therefore it will be a PA sniper... :evillaugh: It's just an intereting anomaly. I have no interest in building large quantities of this design. It would foul up people's Pump-Fu really badly :lol2:

Ty

[sepplainer]

I kinda wanna see the Angel collection....ok Kinda is not the word for it.

[Altec]

Wouldn't it just end up like a pneumatic Autotrigger though? Or is that what you're going for? If you added a regular Autotrigger cam and linkage, you might be able to make the pump handle it self have a RT effect. That could get weird. :clap: Timing it would be a PITA.


Kinda OT- I made a Autotrigger for one of my Autocockers. Didn't work. Haha. Either kinda locked up, or just acted like it wasn't attached. I think I might have been able to make it work with a longer ram stroke. Ok, maybe its 100% off topic...

[p8ntbal4me]

I kinda wanna see the Angel collection....ok Kinda is not the word for it.


The Dark IR3 is in pieces after someone I bought it off of decided to do a a manafold by-pass on it. Its a long story,.. but its getting some MASSIVE work done to it.

I had to do a complete solenoid re-build, then I got a brand new one after I figured out how to complete an SMC part number with custom order numbers on the end (14 calls to Japan:wall:)

Then theres a few A4s (3 to be exact).

I do have a new board comming in the mail (w00t w00t) for one of them.

I got lucky with a new hook-up and they happened to ask me if I had any Angels,.... cant complain with free.:wthumpup:

~ P8nt

[TnDeathInc]

i really dig the collection, hope you didnt overpay on anyof them , but nice collection

[p8ntbal4me]

i really dig the collection, hope you didnt overpay on anyof them , but nice collection

Ehhh,.. all in who buys the stuff really.

Some say I paid alot for some of these guns,... then again,.. I was willing to pay to get them.

All of them were expensive either way you look at it.

But they are beautiful,... and its my little thing I do to keep me happy!:cheers:

I dont play with the Shark Attack,.... ever. I havent even gased it up.

My buddy finally came over to look at it tonight,... he didnt know what to say except "Wow. I dont want to even TOUCH my Micro Mag now"

The most expensiv gun of all the ones I own is the TwistedReflex.

~ P8nt

[warbeak2099]

Wtf I want that reflex kit now!

[p8ntbal4me]

Wtf I want that reflex kit now!

Rent a jack hammer for a day,....

,.. thats the Reflex kit!

~ P8nt

[TnDeathInc]

ah, play with it, its fun trustme. the bonedady gets her field time.

[babyface]

nice set, lets see the others soon.