Help me finish my Mag

[pontiac2m8]

Ok here it is I started with a classic mag so I have most of those parts.

I now have a xvalve, emag rail, benchmark trigger frame and warp left ule body.

The rail has been notched, the trigger frame has been milled flat I need to know what sear do I need? Do I have the right on/off? Any other parts I might need to get her together?

Thanks for all your help! :wall:

[mongoose]

what on/off came with the valve? i would go with a ult
you need a rt sear/pin

you need a high pressure tank
and you also need to bring it to " TUNABALL2" ....... little plug:coffee:

[pontiac2m8]

what on/off came with the valve? i would go with a ult
you need a rt sear/pin

you need a high pressure tank
and you also need to bring it to " TUNABALL2" ....... little plug:coffee:

I traded my classic valve in directly to AGD, so whatever is stock. I have a 68/4500 manifold max flo reg, hopping for some rt action!:evillaugh:

What is TUNABALL2?

[mr doo doo]

AGD should be sending you the x-valve with a standard RT Pro on/off, unless you told them to have the ULT installed (more $$ though).

Tunaball? tell him mongoose :wthumpup:

[pontiac2m8]

AGD should be sending you the x-valve with a standard RT Pro on/off, unless you told them to have the ULT installed (more $$ though).

Tunaball? tell him mongoose :wthumpup:

I did not change a thing however they usually send it is the way it came, no ULT! :banana:

[mongoose]

http://pblegion.com/showthread.php?t=14
you dont need a ult
try it out first then decide if you want a lighter pull
other then that looks like your all set

[IronHyde]

If your lookin to add a foregrip, you will have to have the rail modified. That is if it is a stock rail, in which case i would contact Luke of Lukescustoms.com and have him give you some nice rail milling.

[ahellers]

agreed mongoose,

dont worry about ULT untill you have every thing else together and you have noting else to do.
I would add a new tigger frame. Go intilli and get a sweet trigger from Rouge!

t