my pitiful... one gun....

[Stygshore]

http://a771.ac-images.myspacecdn.com/images01/50/l_a253f1292ad567e280b1249c9f2c7112.jpg

Invert Mini - RI bolt, RI trigger, I-Reg 70 CU tank with LP piston setup in it.

They all look the same.... looking to fix mine to look different this winter.

Styg

[Iggy42]

Yeah Jack Skeleton needs to grace that gun somewhere

[mongoose]

i just picked up a mini...and have had no luck with it.
i put the spring in the wrong way.....thats why im buying your bolt
can you please tell me your setting?
when i did get it right i chopped alot of paint.
i had the factory setting on and didnt change anything.
should i move the bip to 2

[Stygshore]

Thinking more along the lines of the Ole Ded Boyz Paintball Logo actually

http://a853.ac-images.myspacecdn.com/images01/98/l_16ce596a7ebc37a4b81bcdc5bf82d694.jpg


As far as the Mini.... stock settings work fine, I bumped my dwell to 30 because I have had some craptastic paint lately, but other than that, stock settings are fine. Make sure you put a nice thin layer of lube on the bolt guide, and the BACK of the poppet, keep the face and that little hole clean.

Have you done the 2 ball test yet? Put 2 balls in the feed neck, fire it and see if the second ball moves, bounces, or sails into orbit - it is does anything more than move, you have a blowback problem, make sure the poppet hole is not clogged, and the spring is clicked into place. If that's all good, call up Kee, and send it in to them, they will straighten it out - or just ask them to mail you a new poppet.

Styg

[t0nnn]

styg, how do you like the bolt and the trigger?...does the trigger feel any different in terms of movement or is it just looks

[Stygshore]

styg, how do you like the bolt and the trigger?...does the trigger feel any different in terms of movement or is it just looks

Bolt is not much better than stock in my opinion, I had fit problems, and had to put thinner o-rings on my bolt guide in order for the bolt to show any noticeable imporvement over stock.

The trigger is a VAST improvement, double bearing, hardly any side to side, a,d with an extra magnet thrown on the grip frame, it makes it much more adjustable than the stock trigger


Styg

[TnDeathInc]

make sure you dont do the tarad thing like my brother he so used to cutting his eyes off to fuk with the trigger with air he automatically did it on the field, so he was running full semi and hes very fast with it chopping paint saying wtf jacky my new guns broke, then i told him to show me how he cut it on, he was not using the eye. im sure thats not your problem but it was his, he has sent went through about 2 cases of good piant with no barrel breaks

[t0nnn]

Yeah, i've been hearing the bolts aren't making much of a difference...Tech T on pbn was apparently working on a bolt capable of running on 90psi, i'm sure you saw that thread...i'd like to see some videos of that

i'll look into the trigger, I can shoot the stock one fine, but the sideplay and spongey light feel is startin to get to me

[A-Tach-One]

Yo Styg, glad to hear the mini is still treating you well! Hows the back these days?:treadmill:

[Stygshore]

Yeah they came out braggin on the Tech-T bolt, but nothing since then really, I wil believe it when I see it. going from 180-200psi operation to 90 psi operation with just bolt modifications sounds kinda sketchy to me. I'm guessing if it does work, you probably take about a 30% hit in efficiency or something.


My back is punishing me for not taking care of it right now, 3 months of remodel and reffing at the field has made me fel like an 80 year old man again :) But all in all, it's doing well, my legs dont go numb randomly, and I can still feel all my toes :) The 10 hour drive to Tenn next week should do me in though.


Styg