My E-Mag and my Trolump

[BlueDragonX]

Well, since I'm new here I figured I'd start my own gallery post...since I have a gallery post on every other forum :p

I won't go into any details, if you want to know something feel free to ask and I'll answer.

Here we go, first is my E-Mag:
http://www.fatalmachine.org/images/paintball/emag-angled-left-sm.jpg
http://www.fatalmachine.org/images/paintball/emag-angled-right-sm.jpg
http://www.fatalmachine.org/images/paintball/emag-angled-down-sm.jpg

Then there's the Trolump, my Trilogy Pump:
http://www.fatalmachine.org/images/paintball/tril-complete-left-sm.jpg
http://www.fatalmachine.org/images/paintball/tril-complete-right-sm.jpg

I got busy on it with a Dremel before mounting the pump kit, here's some details:
http://www.fatalmachine.org/images/paintball/tril-body-right-1-sm.jpg
http://www.fatalmachine.org/images/paintball/tril-body-left-2-sm.jpg
http://www.fatalmachine.org/images/paintball/tril-grips-right-sm.jpg

Also, it's got hardline and a different ASA now, I just don't have a camera to take pictures anymore.

[MedicDVG]

Interesting.. so you are running the pump unregulated? Do you have a hard time with velocity being too high?

[A-Tach-One]

Nice Emag man!:thumbup:

[BlueDragonX]

Interesting.. so you are running the pump unregulated? Do you have a hard time with velocity being too high?

Well, being a pump it doesn't really need a reg. The CO2 has plenty of time to expand between shots. That is, it would, if I were still using CO2. I'm actually running a 13ci HPA tank on it.

Nice Emag man!:thumbup:

Thanks :D

[Practice Target]

Very clean Emag, I always like the understated.
:hail:

[TnDeathInc]

once again a nicer emag than your typical one very clean and well thought out.

[Papa_Smurf]

sweet emag!