noxx55
07-14-2008, 09:00 AM
Well, time to thin down some extra stuff I have lying around. Shop is getting overfilled and I am running out of room on the wall. All prices are shipped and OBO. Trades are at the bottom. Here ya go:
First off
Midblocked pre 99 RF, front is drilled and tapped for post 2k specs
Jcurt halfblock kit milled for midblock conversion, all delrin
Powerlyte trigger frame
Body and frame annod black
ANS LPR, ST ram, chrome 3-way
LP internals
stainless Velocity adjuster
AA Vigilante Reg
Duckbill ASA and macro swivel fittings
Teardrop barrel
Houge grips (not pictured)
Timed to a certain extent
$200
http://img2.putfile.com/thumb/7/19501402792.jpg (http://www.putfile.com/pic/8429563)http://img2.putfile.com/thumb/7/19501402823.jpg (http://www.putfile.com/pic/8429564)
Pre 99 Midblock RF sniper
Jcurt halfblock kit milled for midblock conversion, all delrin
86 degree frame
Kapp Panels (not pictured)
Bob Long Torpedo Reg
Pump kit (need to make pump handle, will be done tomorrow)
Will come with fittings and an ASA
Carbon Fibur barrel .687 w/ Lapco .683 and .685 sizers
$$SOLD$
http://img2.putfile.com/thumb/7/19501402860.jpg (http://www.putfile.com/pic/8429566)
Build a cocker
Halfblock pre 99 LF
ShockTech swingframe
Full Pneumatics
Pump kit (pump handle not shown)
Jcurt halfblock kit
Unknown reg
ASA
fittings and hose
Everything you need, just put it together yourself because I am tired of assembling right now
$170 unassembled, $210 assembled
http://img2.putfile.com/thumb/7/19501402831.jpg (http://www.putfile.com/pic/8429569)
Spyder E 99 with really really long barrel (great for barrel tagging)
single, 3 shot burst, full auto
Not much else to say about that
$85 shipped
http://img2.putfile.com/thumb/7/19501402789.jpg (http://www.putfile.com/pic/8429557)http://img2.putfile.com/thumb/7/19501402721.jpg (http://www.putfile.com/pic/8429558)
Spyder clone electronic ( I have a couple of these)
LNIB, comes with stock barrel
single, 3 shot burst, full auto
Not much else to say about that
$80
http://img2.putfile.com/thumb/7/19501402786.jpg (http://www.putfile.com/pic/8429559)
x2 VM 68's
All stock, 1 comes with the J&J, the other comes with the stock barrel
Both will come with aluminum side panels
Add $35 for a Thompson stock with adapter
Add $25 for a vertical angled ASA adapter (pics if needed)
$95 for the one with the J&J
$80 for the one with out it
http://img2.putfile.com/thumb/7/19501402710.jpg (http://www.putfile.com/pic/8429560)
Nasty PGP!!!
Body built by Chaplnstone
Skull feed plugs
extended CO2 knob
Plamer's frame (came off my Nasty Super Stocker)
Aluminum panel grips
Brass trigger shoe
Delrin bolts and feed plugs
Feed plug leashes
I will include a 45 frame adapter
Shot great this weekend 14-16 shots from a 12 gram at 280fps
$500
http://img2.putfile.com/thumb/7/19501402768.jpg (http://www.putfile.com/pic/8429561)http://img2.putfile.com/thumb/7/18502293658.jpg (http://www.putfile.com/pic/8380538)
Only trade I am looking for is PPS stuff (mainly a RF 2k Blazer with stab and a barrel, but am always tempted by Super Stockers), 3.5/4oz tanks, a Doc Nickels capless shoulder rig, and cash. Thanks for looking!
First off
Midblocked pre 99 RF, front is drilled and tapped for post 2k specs
Jcurt halfblock kit milled for midblock conversion, all delrin
Powerlyte trigger frame
Body and frame annod black
ANS LPR, ST ram, chrome 3-way
LP internals
stainless Velocity adjuster
AA Vigilante Reg
Duckbill ASA and macro swivel fittings
Teardrop barrel
Houge grips (not pictured)
Timed to a certain extent
$200
http://img2.putfile.com/thumb/7/19501402792.jpg (http://www.putfile.com/pic/8429563)http://img2.putfile.com/thumb/7/19501402823.jpg (http://www.putfile.com/pic/8429564)
Pre 99 Midblock RF sniper
Jcurt halfblock kit milled for midblock conversion, all delrin
86 degree frame
Kapp Panels (not pictured)
Bob Long Torpedo Reg
Pump kit (need to make pump handle, will be done tomorrow)
Will come with fittings and an ASA
Carbon Fibur barrel .687 w/ Lapco .683 and .685 sizers
$$SOLD$
http://img2.putfile.com/thumb/7/19501402860.jpg (http://www.putfile.com/pic/8429566)
Build a cocker
Halfblock pre 99 LF
ShockTech swingframe
Full Pneumatics
Pump kit (pump handle not shown)
Jcurt halfblock kit
Unknown reg
ASA
fittings and hose
Everything you need, just put it together yourself because I am tired of assembling right now
$170 unassembled, $210 assembled
http://img2.putfile.com/thumb/7/19501402831.jpg (http://www.putfile.com/pic/8429569)
Spyder E 99 with really really long barrel (great for barrel tagging)
single, 3 shot burst, full auto
Not much else to say about that
$85 shipped
http://img2.putfile.com/thumb/7/19501402789.jpg (http://www.putfile.com/pic/8429557)http://img2.putfile.com/thumb/7/19501402721.jpg (http://www.putfile.com/pic/8429558)
Spyder clone electronic ( I have a couple of these)
LNIB, comes with stock barrel
single, 3 shot burst, full auto
Not much else to say about that
$80
http://img2.putfile.com/thumb/7/19501402786.jpg (http://www.putfile.com/pic/8429559)
x2 VM 68's
All stock, 1 comes with the J&J, the other comes with the stock barrel
Both will come with aluminum side panels
Add $35 for a Thompson stock with adapter
Add $25 for a vertical angled ASA adapter (pics if needed)
$95 for the one with the J&J
$80 for the one with out it
http://img2.putfile.com/thumb/7/19501402710.jpg (http://www.putfile.com/pic/8429560)
Nasty PGP!!!
Body built by Chaplnstone
Skull feed plugs
extended CO2 knob
Plamer's frame (came off my Nasty Super Stocker)
Aluminum panel grips
Brass trigger shoe
Delrin bolts and feed plugs
Feed plug leashes
I will include a 45 frame adapter
Shot great this weekend 14-16 shots from a 12 gram at 280fps
$500
http://img2.putfile.com/thumb/7/19501402768.jpg (http://www.putfile.com/pic/8429561)http://img2.putfile.com/thumb/7/18502293658.jpg (http://www.putfile.com/pic/8380538)
Only trade I am looking for is PPS stuff (mainly a RF 2k Blazer with stab and a barrel, but am always tempted by Super Stockers), 3.5/4oz tanks, a Doc Nickels capless shoulder rig, and cash. Thanks for looking!