Mann
10-16-2008, 05:32 PM
EP kits:
---------------------------------------------
For all of those DIYers I have electro pneumatic kits that can easily be used on any marker.
---------------------------------------------
http://i70.photobucket.com/albums/i83/mannsports/IMG_3238.jpg
Kit includes everything pictured above
-UTB Board kit (exactly what you get from Scenario Dreams)
Universal T-board
Wiring harness
Membrane pad and adapter
9V battery connector
5mm RGB LED
-S070C-SDG-32 3 way solenoid valve
- 30g&50g microswitchs
-MPA-3 (installed with rod & cut to fit your frame)
- 2' black tubing
- 2 X 90* plastic fittings
- 2 X straight plastic fittings
- 2 X 6-32 grub screws to mount your MPA-3 (not pictured above)
The price for the complete kit is 142.00 shipped via usps priority with insurance
--------------------------------------------
Dont need the complete kit? Want to buy just one part/piece?
-UTB get it here:
http://www.automags.org/forums/showthread.php?t=232837
-S070C-SDG-32 3 way solenoid valve - 42.00 + shipping
- 30 or 50g microswitches 3.50ea + shipping
- MPA-3 or other pneumag parts get them here:
http://www.automags.org/forums/showthread.php?t=226161
- plastic fittings (straight or 90) - .75ea + shipping
- 1' of tubing - 1.00ea + shipping
-----------------------------------------------
Need a different pneumatic fitting?
I also offer
C - metal straight fitting with oring
D - metal 90* swivel fitting with oring
E - metal 90* fitting with oring
http://i70.photobucket.com/albums/i83/mannsports/IMG_3239.jpg
-------------------------------------------------
Want to make that EP mag a sleeper?
Place your LPR inside your frame and use this foregrip:
Battery foregrip (only the foregrip & internals are included in the sale):
http://i70.photobucket.com/albums/i83/mannsports/IMG_3228.jpg
http://i70.photobucket.com/albums/i83/mannsports/IMG_3225.jpg
This marker complete without barrel hopper or tank is only 40oz. My mini weighs 32oz. My Emag weighs 62oz.
Here is a rough sketch of how the foregrip is made. This sketch is not exact.
http://i70.photobucket.com/albums/i83/mannsports/foregrip.jpg
As for specs
The complete foregrip with carbon fiber outside tube weighs ~5.6oz
The complete foregrip with aluminum outside tube weighs ~6.3oz
The overall length is ~5.25" long
The outside diameter for the foregrip is 1.0"
The foregrip uses 3 batteries
The foregrip does require the rail to be drilled to allow for the wires & bolts. Here is a sample pic of the holes on the bottom of one of my rails.
http://i70.photobucket.com/albums/i83/mannsports/th_IMG_3235.jpg (http://i70.photobucket.com/albums/i83/mannsports/IMG_3235.jpg)
There are a few ways you can order the foregrip. All foregrips include 6 X Rechargable 750mAh batteries, 1 battery charger, & 2 X top mount screws
Option A (raw)
1 X raw(unannodized) bottom cap
1 X raw(unannodized) outside tube
Option B (Carbon fiber)
1 X gloss black bottom cap
1 X Carbon fibeer outside tube
Option C (Black)
1 X gloss black bottom cap
1 X gloss black outside tube
Option A = 142 shipped via usps priority with ins
Option B & C = 152 shipped via usps priority with ins
All foregrips will include directions on installing the foregrip.
-------------------------------------------------
Installs:
LPR inside your frame (sleeper look) - 40*** (this is for most frames. Some will vary in price)
MPA-3 - 20
Microswitch - 20 (you get to keep your mechanical safety)
UTB board, solenoid, LED & membrane pad- 40
Tuning your EP or pneumag - 30
MSV-2 (for pneumags only) - 20 (includes drilling behind your trigger wihout drilling all the way through your trigger guard)
Add an extra 1/8 npt hole to your asa - 20
Post or pm me with any questions.
My feedback
http://www.automags.org/forums/showthread.php?t=194877
---------------------------------------------
For all of those DIYers I have electro pneumatic kits that can easily be used on any marker.
---------------------------------------------
http://i70.photobucket.com/albums/i83/mannsports/IMG_3238.jpg
Kit includes everything pictured above
-UTB Board kit (exactly what you get from Scenario Dreams)
Universal T-board
Wiring harness
Membrane pad and adapter
9V battery connector
5mm RGB LED
-S070C-SDG-32 3 way solenoid valve
- 30g&50g microswitchs
-MPA-3 (installed with rod & cut to fit your frame)
- 2' black tubing
- 2 X 90* plastic fittings
- 2 X straight plastic fittings
- 2 X 6-32 grub screws to mount your MPA-3 (not pictured above)
The price for the complete kit is 142.00 shipped via usps priority with insurance
--------------------------------------------
Dont need the complete kit? Want to buy just one part/piece?
-UTB get it here:
http://www.automags.org/forums/showthread.php?t=232837
-S070C-SDG-32 3 way solenoid valve - 42.00 + shipping
- 30 or 50g microswitches 3.50ea + shipping
- MPA-3 or other pneumag parts get them here:
http://www.automags.org/forums/showthread.php?t=226161
- plastic fittings (straight or 90) - .75ea + shipping
- 1' of tubing - 1.00ea + shipping
-----------------------------------------------
Need a different pneumatic fitting?
I also offer
C - metal straight fitting with oring
D - metal 90* swivel fitting with oring
E - metal 90* fitting with oring
http://i70.photobucket.com/albums/i83/mannsports/IMG_3239.jpg
-------------------------------------------------
Want to make that EP mag a sleeper?
Place your LPR inside your frame and use this foregrip:
Battery foregrip (only the foregrip & internals are included in the sale):
http://i70.photobucket.com/albums/i83/mannsports/IMG_3228.jpg
http://i70.photobucket.com/albums/i83/mannsports/IMG_3225.jpg
This marker complete without barrel hopper or tank is only 40oz. My mini weighs 32oz. My Emag weighs 62oz.
Here is a rough sketch of how the foregrip is made. This sketch is not exact.
http://i70.photobucket.com/albums/i83/mannsports/foregrip.jpg
As for specs
The complete foregrip with carbon fiber outside tube weighs ~5.6oz
The complete foregrip with aluminum outside tube weighs ~6.3oz
The overall length is ~5.25" long
The outside diameter for the foregrip is 1.0"
The foregrip uses 3 batteries
The foregrip does require the rail to be drilled to allow for the wires & bolts. Here is a sample pic of the holes on the bottom of one of my rails.
http://i70.photobucket.com/albums/i83/mannsports/th_IMG_3235.jpg (http://i70.photobucket.com/albums/i83/mannsports/IMG_3235.jpg)
There are a few ways you can order the foregrip. All foregrips include 6 X Rechargable 750mAh batteries, 1 battery charger, & 2 X top mount screws
Option A (raw)
1 X raw(unannodized) bottom cap
1 X raw(unannodized) outside tube
Option B (Carbon fiber)
1 X gloss black bottom cap
1 X Carbon fibeer outside tube
Option C (Black)
1 X gloss black bottom cap
1 X gloss black outside tube
Option A = 142 shipped via usps priority with ins
Option B & C = 152 shipped via usps priority with ins
All foregrips will include directions on installing the foregrip.
-------------------------------------------------
Installs:
LPR inside your frame (sleeper look) - 40*** (this is for most frames. Some will vary in price)
MPA-3 - 20
Microswitch - 20 (you get to keep your mechanical safety)
UTB board, solenoid, LED & membrane pad- 40
Tuning your EP or pneumag - 30
MSV-2 (for pneumags only) - 20 (includes drilling behind your trigger wihout drilling all the way through your trigger guard)
Add an extra 1/8 npt hole to your asa - 20
Post or pm me with any questions.
My feedback
http://www.automags.org/forums/showthread.php?t=194877