PDA

View Full Version : Where to get stuff - Links

BigEvil
11-05-2007, 07:06 AM
These are some of the places and people that I have dealt with over the years and can personally recommend. Feel free to add your links.

************************************************** ******
AGD
www.AirgunDesignsUSA.com (http://www.AirgunDesignsUSA.com) - AGD home page
www.Tunamart.com (http://www.Tunamart.com) - Tunaman
www.roguesportz.com (http://www.roguesportz.com) - Roguefactor
www.themagsmith.com (http://www.themagsmith.com) - AGD dealer
www.NiedTech.com (http://www.niedtech.com/) - Home of the XMOD

AKA
www.akalmp.com/ (http://www.akalmp.com/) - AKA homepage
www.destructivecustoms.com (http://www.destructivecustoms.com) - AKA authorized warranty, repair and custom center.
www.wickedairsportz.com (http://www.wickedairsportz.com) - AKA aftermarket boards


MacDev
www.Macdev.net (http://www.Macdev.net) - MacDev home page
www.borgfocus.com (http://www.borgfocus.com) - your source for the MacDev Cyborg. This website offers complete, accurate and detailed instructions pertaining to configuring the electronics of your Cyborg, maintaining and servicing the various mechanical components and adjusting and fine tuning specific pieces.
www.PaintballKingdom.com (http://www.PaintballKingdom.com) - MacDev service, ***** and upgrades.


Bob Long
www.boblongdirect.com (http://www.boblongdirect.com) - New home site of B.L.A.S.T.
www.Paintballkingdom.com (http://www.Paintballkingdom.com) - *****, service, aftermarket accessories.

WDP
www.WDP.tv (http://www.WDP.tv) - Home page of the Angel
www.ImpactPaintball.com (http://www.ImpactPaintball.com) - Angel service center and home of WDP master tech Marc Costa. Over 10 years of experience servicing WDP and other popular markers. Good supply of stock and aftermarket ***** and accessories.



General Paintball *****, Accessories, and Technical information

www.AirSoldier.com (http://www.AirSoldier.com) - Tinkerer's heaven! Great supply of pneumatics, solenoids, and some hard to find *****. Great guy to deal with if you already don't know.

www.Centerflagproducts.com (http://www.Centerflagproducts.com) THE BEST regs on the market.

www.DoroPaintball.com (http://www.doropaintball.com/) - Awesome service and selection.

www.PBGear.com (http://www.pbgear.com/) @ Action Villiage - i have had pretty good luck dealing with them, but have heard stories about out of stock nightmares. Always good to call.

www.specialopspaintball.com (http://www.specialopspaintball.com) - Great source for your scenario needs.

www.vernalpaintball.com (http://www.vernalpaintball.com) - bryceeden's store. Lets support one of our own!





Other Misc. Links

Elite Deal Seeker - Shop the best of the paintball B/S/T forums in one place.
http://www.elitedealseeker.com/index.cgi?category=paintball

Anodizing Services - GBA Gruntbull Anodizing www.Gruntbull.com (http://www.Gruntbull.com)
I have used GBA a few times already with good results. They get better and better every day.

Parts and Hardware - www.Mcmaster.com (http://www.Mcmaster.com)

Marker Customizations - Rainman229 (from MCB) www.rainman229.com (http://www.rainman229.com) and can be found in his own forum on MCB





Members PERSONAL websites

WWW.TDSPaintball.com (http://www.tdspaintball.com/) - Dark Side's team.

www.ZakVetter.com (http://www.zakvetter.com/) - A very complete "how-to" on rapid-fire and flashy videos.
matteusz
11-05-2007, 10:42 PM
I have a wholesale account with

www.paintball-discounters.com

They have been reliable and reasonably price most of their stuff. I have also gotten some screaming deals on mag stuff when they get in old new stock and blow it out.
MedicDVG
11-07-2007, 09:04 AM
How about anno and milling

Gruntbull, Rainman, etc..

I don't think Lee gets a link though.. Punisher is basically done with new stuff...
Dark Side
11-07-2007, 09:20 AM
I have a wholesale account with

www.paintball-discounters.com

They have been reliable and reasonably price most of their stuff. I have also gotten some screaming deals on mag stuff when they get in old new stock and blow it out.

Can I bribe you?
BigEvil
11-07-2007, 09:20 AM
How about anno and milling

Gruntbull, Rainman, etc..

I don't think Lee gets a link though.. Punisher is basically done with new stuff...


Good points. I'll get on that.
MedicDVG
11-07-2007, 09:28 AM
Don't forget Doc too!! http://www.docsmachine.com/

and maybe WWA -- www.whitewolfairsmithing.com

trying to think of others.. but it is getting late here in Iraq.. and my pillow is calling me......:freak:
Flyingpootang
11-07-2007, 10:40 AM
Great place for O-ring (all types), tools, Macro line, Fittings, Dow 33 grease, etc. Example 100 Buna N type ASE Hard bottle o-rings for dollar and change.
Just type in what your looking for and it'll pop up all the matches
http://www.mcmaster.com/
Papa_Smurf
11-07-2007, 07:46 PM
Good stuff. I just picked up my first AKA and needed some info on where to start.
babyface
11-08-2007, 08:33 PM
wow great thread, i just spent an hour on tuna and rouge's site. makin a shoppin list
LorneCash
11-11-2007, 02:05 PM
BigE you should update your first post so as this thread gets long people don't have to scroll through the whole thing.

Also please add my site www.NiedTech.com

Here's another good one too:
www.centerflagproducts.com - Best High flow regulators ever
Papa_Smurf
11-12-2007, 11:32 AM
BigE you should update your first post so as this thread gets long people don't have to scroll through the whole thing.

Also please add my site www.NiedTech.com

Here's another good one too:
www.centerflagproducts.com - Best High flow regulators ever

I own both. Top notch.
bryceeden
11-13-2007, 09:21 AM
Well, I sell about everything, but I speciallize in Bob Long and all the Mini upgrades people have a hard time finding, the website is www.vernalpaintball.com but all the website does for you is give a phone number to reach me which is (435)828-3300.
Mann
11-17-2007, 09:24 PM
www.lukescustoms.com

:confused:
tymcneer
12-02-2007, 04:57 PM
Just a note... Rainman222 is actually Rainman229. BigEvil, you need to change the links, as they don't lead anywhere.

Ty
BigEvil
12-02-2007, 05:15 PM
Just a note... Rainman222 is actually Rainman229. BigEvil, you need to change the links, as they don't lead anywhere.

Ty

OOPS. Thanks
tymcneer
12-02-2007, 05:45 PM
No problem. I hadn't seen his site in a while... clicked on the link... and nothing happened... It's all fixed now!

Ty
redic
12-06-2007, 06:37 PM
maybe its just me but when i click on the link i get nothing
tymcneer
12-06-2007, 06:58 PM
BigEvil... you fixed the link text, but not the link...

Ty
Looper
12-18-2007, 08:41 PM
http://www.smallparts.com/

A good source for small parts... I have used them for SS Hypo tube to make custom hard lines.
druid
12-19-2007, 12:21 AM
http://www.smallparts.com/

A good source for small parts... I have used them for SS Hypo tube to make custom hard lines.

Can you tell me which model most closely resembles the hard valve-line a Phantom uses...and the similar/same ends/fittings? Thanks much!
Looper
12-19-2007, 10:23 PM
Can you tell me which model most closely resembles the hard valve-line a Phantom uses...and the similar/same ends/fittings? Thanks much!

HTX-08R-36
HYPO Tube S/S 304-RW 8GA .165 OD X .135 ID 36"

I used the exact same fittings that came on the Phantom VSC. The rubber hose that is used with the fittings for the phantom are a bit tight over the out side but I found it was easier to slide them from the phantom tube onto the Hypo tube. Also the inside diameter is much larger, thinner walled, on the hypo tube than the one that is delivered with the Phantom VSC.

I've noticed that Doc Nickel makes a fitting less hose and thought that I would like to try that the next time I need to make a hard line for a marker. I believe he is silver soldering the threaded part of a machined down fitting to the pre bent tube.
druid
12-20-2007, 02:32 AM
awesome. Thanks!
Z-man
12-27-2007, 08:18 PM
www.ZakVetter.com

Still a very complete "how-to" on rapid-fire and flashy videos that I am certain can be found elsewhere. Might fit under personal sites, might fit under "mag tech info" your call.
matteusz
12-27-2007, 09:24 PM
Where can I get some adjustable regs that will go up to 1000+ psi. I am hoping for 1200 psi at least. I need the bottle type that will screw into an ASA and still be adjustable. I can send in tanks and have them installed no problem. Happy to set up as a dealer. I am looking for several of these and would like to be able to come back for more.

Center flag the best? How can I get hold of them as their site is fritzing out on me and I can't get to contact info.

or maybe these:

http://www.sakworldpaintball.com/niduirpaairt.html

Any ideas would be much appreciated.

Mat
stupiddogg
01-23-2008, 04:21 PM
Parts/Cocker/Markers/fittings/Modifications/Pump


www.palmer-pursuit.com


Pump Gear
http://www.chipleymachine.com
http://www.pbmafia.com
http://www.phantomonline.com
http://www.wevopaintball.com
http://cartermachine.com
http://stockclasspaintball.com
http://desertduckdd68.com

:wthumpup:
Foxworthy
01-23-2008, 06:13 PM
For stores I like US Military Gear (http://www.usmilitarygear.com/) partly because the owner is good friend with my brother and I use to be on a team sponsored by them but mostly because he has some good deals. He has a lot more than just scenario gear then when he first started and thats a plus, no mags or phantoms yet though but not many people sell them these days anyway.
druid
01-25-2008, 04:18 PM
www.markerkits.com (http://www.markerkits.com) for O-Rings and Hatersauce. Good prices and great shipping
DevilMan
01-25-2008, 06:08 PM
Hey BE... can you add www.DMSPaintball.com to the list???

It's owned/operated by the owner/operator of www.TAWPaintball.com who is one of NorCal's primary scenario game companies and a great person to deal with as well as being a sponsor to my team.

I didn't know how best to list it, but Damian (the owner) told me to feel free to spread the word and anything that is listed as in stock will ship out in 2 days or so at the latest and if it's out of stock or something you want that is not listed to call em up and find out.

If ANYONE here has any issues with DMS or TAW you can contact me and I'll see what I can get you in terms of resolution.

And guys if you have a local shop... try and support them. And if you don't (like me) try and support someone like DMS or BryceEden and the rest of the folks here that have accounts and stores. Tis better to do it that way than to keep making the big ones bigger til they snuff out the little ones.

DM
hill160881
08-27-2010, 10:56 PM
This one is for predator board manuals
http://www.predatorelectronics.com/manuals.html

This one is for the virtue board manuals
http://home.advantagepb.com/support/tech.html#manuals

This one is for the Tadao boards
http://www.tadaotechnologies.com/productcart/pc/viewcat.asp

For all your programming needs.
Omni
04-06-2011, 06:12 PM
Is the MagSmith still running? I've just started getting back into all this and was hoping to order a subzero feedneck from them. I sent payment but they never shipped or responded. I would have ordered directly from Rouge, but I only just discovered this place (and that he's the one who makes them) today.

Thanks.
stockpatriot
05-05-2011, 10:56 PM
Is the MagSmith still running? I've just started getting back into all this and was hoping to order a subzero feedneck from them. I sent payment but they never shipped or responded. I would have ordered directly from Rouge, but I only just discovered this place (and that he's the one who makes them) today.

Thanks.

the MagSmith is still in operation. I just ordered some parts from them late last week. Got my stuff within a few days. The customer service email was also responsive when I inquired about the RPG trigger and they were kind enough to point me to Rogue and this forum.
jannypan
07-31-2011, 11:55 PM
I don't think Lee gets a link though.. Punisher is basically done with new stuff...
Tera Gold (http://www.tera2u.com/)
Cheap Tera Gold (http://www.teragoldbox.com/TeraGoldBox.Gold)
Tera Online Gold (http://www.tera2buy.com/tera2buy.Gold)