Pneu cocker

[michbich]

I was browsing the custom markers at pbn and saw a pneued cocker. It surprised me to see that since i have only known about pneued mags. Am i the only one that was ignorant enough to think it was only done on mags? On what marker did the pneu trigger begging with?

the thread:
http://www.pbnation.com/showthread.php?t=2424261

And for those that are boycotting pbn:

http://img03.picoodle.com/img/img03/5/12/5/f_DSCN0663m_049d69a.jpg (http://www.picoodle.com/view.php?img=/5/12/5/f_DSCN0663m_049d69a.jpg&srv=img03)

http://img03.picoodle.com/img/img03/5/12/5/f_DSCN0665m_df3a866.jpg (http://www.picoodle.com/view.php?img=/5/12/5/f_DSCN0665m_df3a866.jpg&srv=img03)

http://img03.picoodle.com/img/img03/5/12/5/f_DSCN0664m_de6e3d6.jpg (http://www.picoodle.com/view.php?img=/5/12/5/f_DSCN0664m_de6e3d6.jpg&srv=img03)

[bryceeden]

Interesting, very interesting. I wonder how it runs.

[CHRONOBREAK]

there was a vidwo posted long ago of a cocker

pneu mags and cockers have been around since the mid 90s i believe or earlier.

you can pneu frame just about anything

spyder, tippmann, mag, cocker,...

[michbich]

In his thread, he said that he still had some bugs, "3 way is a little sticky and the trigger return spring is to strong" and that he still can't manage to walk it.

I read at the end of his thread that he is already giving up and parting the frame.

[bryceeden]

there was a vidwo posted long ago of a cocker

pneu mags and cockers have been around since the mid 90s i believe or earlier.

you can pneu frame just about anything

spyder, tippmann, mag, cocker,...

I might have to try the spyder, I've got more than enough of them and all the parts I need. I'll just have to try to figure out exactly how.

[CHRONOBREAK]

worr had, or intended to have a pneu frame on their spyder..

though for patent issues or other im sure that was scrapped

[MedicDVG]

what do the pnuematics do? is there a ram inside that actautes the 3-way or something? I don't understand....

[mongoose]

what do the pnuematics do? is there a ram inside that actautes the 3-way or something? I don't understand....

Paging cyberave

[Meph]

what do the pnuematics do? is there a ram inside that actautes the 3-way or something? I don't understand....

You ever pull the autococker trigger when it's degassed and not cocked? So that all that moves is the 4-way...

Well imagine another 4-way and ram inside the frame giving you that type of trigger pull. This way you don't have to use the traditional method of mechanical linkage with the trigger moving a sear. And the sear itself is stiff due to the hammer/spring pushing against it. So you remove that stiffness.

In some cases if the installment reaches the butter zone the trigger pull will be so light is can be walkable like it's an electronic marker.


In other words it's another thing to break. :evillaugh: