Xvalve leak

[Sundown]

So I have no touched any of my mags for about a year now and now I need to tune all of them... since they all seem to be out of tune :) haha

And I've been searching around but not finding the right thread I guess.

So here is my question:
What is it again when you get a leak from that little whole on the other side of the xvalve?

If needed I have a Xvalve with LvL10 and ULT.

thanks guys :wthumpup:... this is really far in my mind :D

[Looper]

Back little hole is the (24) Reg Nut o-ring...
Front Little Hole is, well from the best that I can tell a pressure relief hole from the front dump chamber and I do not see any serviceable parts for that...

Have you tried lots of oil yet?

http://img131.imageshack.us/img131/5427/xvalveexplodedff7.gif

[A-Tach-One]

Out the little hole on the side of the valve? Pull out the reg pin and clean out the area of all possible debris. Then oil the reg pin up well and reinstall. Try that.

[Sundown]

Awsome thanks guys, I'll try that out :)

[RogueFactor]

http://www.pblegion.com/showthread.php?t=2969

Here is one with all the parts numbers too. Just in case.

http://www.pblegion.com/attachment.php?attachmentid=121&stc=1&d=1222976503