Need beta testers for a mag efficiency upgrade.

[hill160881]

Looks like these will cost $12 to $15, shipped for the beta run with the requirement of feedback. Meaning the buyer needs to have purchased the red power tube oring and are prepared to pay attention to there air to ball consumption pretty closely as they play. Then report back those numbers and any tuning issues they had.

I need feedback so I cam make any needed changes before I have a bunch of these made.

These are the prototypes

http://i971.photobucket.com/albums/ae195/hill160881/Temp/Projects/100_1411.jpg

There are 5 spots for the Classic and 5 for the X-valve. So post if you want to pick one up and help with the testing process. If any changes are needed the people who get a beta version will get the improved version free of charge.

Classic Valve(I will do a video but you may need to have the power tube removed by a pro on this valve)
1. chadders(MCB)
2.
3.
5.
5.


X-valve (I will do a video on how to remove this valve's power tube.)
1. chadders(MCB)
2. james(MCB)
3.
4.
5.


Locations for the red power tube oring and so you know what it looks like. Once removed you can open and close the power tube area many times without damaging the oring, but the first time destroys it usually.

Xvalve
http://i971.photobucket.com/albums/ae195/hill160881/Temp/Projects/100_1373.jpg

Classic
http://i971.photobucket.com/albums/ae195/hill160881/Temp/Projects/100_1393.jpg