p8ntbal4me
12-29-2007, 05:07 PM
This thread is for a quick and easy way to find information that you need for a particular gun or part your working on.
It will also contain information about tools and the specs needed for them.
(Example: Feedneck for AGD ULE bodies - Angel Feedneck Thread = Tap Size: M21x0.75 / Drill Bit Size: 20.25mm (.797"=51/64")
If your LOOKING for information, DO NOT POST in here! Posts will be deleted.
If you have information, post it in here and I will edit the first post for easy access to information.
If you believe information someone posted is FALSE, PM them FIRST, tell them, then have the person edit the post.
The idea is to have all information that you may need for personal projects at hand without having to dig for it.
List starts here:clap:
Air Gun Design
AGD .68 Classic
Body Length = 6.25"
O.D. = 1.125"
I.D. = 1"
Feed Tube
O.D. = 0.875"
I.D. = .075"
Grip Frame Screws Thread = 10-32
Frame Hole Spacing = 4.125"
AGD R/T Classic (RTC)
AGD R/T Pro (RTP)
AGD E-Mag
Electrical
AGD Battery = 16.8V, 650mAH 0800
Microcontroler = Atmel AT90S2313-4SC
Solenoid = MSA (Magnetic Sensor-Systems) "S-15-75-26AD"
Display =
Trigger/HES Magnets =
HES =
AGD X-Mag
Electrical
AGD Battery = 16.8V, 650mAH 0800
Microcontroler = Atmel AT90S2313-4SC
Solenoid = MSA (Magnetic Sensor-Systems) "S-15-75-26AD"
Display =
Trigger/HES Magnets =
HES =
Automag Trigger Frames
Hyper Frame
Solenoid = Emessem 9954/0312 9VDC-PD (purchase from MSA, will come with the connector for E1/E2/Ego/Scenario Dreams boards. Hyperframe connector no longer shipped with this noid from MSA)
Boo-Yaah/Mako Storm
Solenoid = Emessem 9707/0107 9VD-PD
This noid was made by MSA. It can not be purchased in more than samples due to restrictions set by Mako involving the design of the noid as a custom part. (information give by MSA)
WDP Angel
Angel LED
Feedneck Thread = M21x0.75
Detent Threads = M10x1.00
LPR & Battery Caps Thread = M19x0.75
Angel LCD
Feedneck Thread = M21x0.75
Trigger screws = M4x10mm
Sight rail = M2.5x16mm
Back plate = M3x6mm
Grip frame = M5x16mm
Flash tank = M5x12mm
ASA = M5x18mm
Front and back center grub screws = M5x8mm
Bottom body grub = M4x6mm
LPR & Battery Caps Thread = M19x0.75
Electrincal
Solenoid = SMC SY114-VG
6vdc Max press. 0.7MPa
Angel IR3
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Electrical
Solenoid = SMC SY3140-VG-X134 <--- You can get the SY series, but the "X134" is custom. I am waiting to hear back from SMC on this.
Angel A4
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Angel Fly
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Angel G7
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Angel GAT
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Angel A1
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
WGP
Cocker (1999 and under)
Cocker (2000+)
Cocker Trigger Frames
E-Blade
Sear Solenoid = Emessem 9954/0312 9VDC-PD (purchase from MSA, this part number INCLUDES the pigtail connector)
E1/E2 Board Mount Screw Threads = M2.5 or M1.5 <----depends on the year the frame was made
Ego
Board Mount Screw Threads
Depends on year of frame:
2005 Star Frames = M1.5
2006 Star Frames =
LCD Screen of the 05 Board = UMS-7449FD-1B
Manuals For Aftermarket Boards
Predator Morlock 2007 w/ 10.0 Code
http://img2.putfile.com/thumb/1/322193744.jpg (http://www.putfile.com/pic.php?img=7418271)
Break Beam Eye Component Wiring
http://img2.putfile.com/thumb/1/415103723.jpg (http://www.putfile.com/pic.php?img=7424319)
It will also contain information about tools and the specs needed for them.
(Example: Feedneck for AGD ULE bodies - Angel Feedneck Thread = Tap Size: M21x0.75 / Drill Bit Size: 20.25mm (.797"=51/64")
If your LOOKING for information, DO NOT POST in here! Posts will be deleted.
If you have information, post it in here and I will edit the first post for easy access to information.
If you believe information someone posted is FALSE, PM them FIRST, tell them, then have the person edit the post.
The idea is to have all information that you may need for personal projects at hand without having to dig for it.
List starts here:clap:
Air Gun Design
AGD .68 Classic
Body Length = 6.25"
O.D. = 1.125"
I.D. = 1"
Feed Tube
O.D. = 0.875"
I.D. = .075"
Grip Frame Screws Thread = 10-32
Frame Hole Spacing = 4.125"
AGD R/T Classic (RTC)
AGD R/T Pro (RTP)
AGD E-Mag
Electrical
AGD Battery = 16.8V, 650mAH 0800
Microcontroler = Atmel AT90S2313-4SC
Solenoid = MSA (Magnetic Sensor-Systems) "S-15-75-26AD"
Display =
Trigger/HES Magnets =
HES =
AGD X-Mag
Electrical
AGD Battery = 16.8V, 650mAH 0800
Microcontroler = Atmel AT90S2313-4SC
Solenoid = MSA (Magnetic Sensor-Systems) "S-15-75-26AD"
Display =
Trigger/HES Magnets =
HES =
Automag Trigger Frames
Hyper Frame
Solenoid = Emessem 9954/0312 9VDC-PD (purchase from MSA, will come with the connector for E1/E2/Ego/Scenario Dreams boards. Hyperframe connector no longer shipped with this noid from MSA)
Boo-Yaah/Mako Storm
Solenoid = Emessem 9707/0107 9VD-PD
This noid was made by MSA. It can not be purchased in more than samples due to restrictions set by Mako involving the design of the noid as a custom part. (information give by MSA)
WDP Angel
Angel LED
Feedneck Thread = M21x0.75
Detent Threads = M10x1.00
LPR & Battery Caps Thread = M19x0.75
Angel LCD
Feedneck Thread = M21x0.75
Trigger screws = M4x10mm
Sight rail = M2.5x16mm
Back plate = M3x6mm
Grip frame = M5x16mm
Flash tank = M5x12mm
ASA = M5x18mm
Front and back center grub screws = M5x8mm
Bottom body grub = M4x6mm
LPR & Battery Caps Thread = M19x0.75
Electrincal
Solenoid = SMC SY114-VG
6vdc Max press. 0.7MPa
Angel IR3
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Electrical
Solenoid = SMC SY3140-VG-X134 <--- You can get the SY series, but the "X134" is custom. I am waiting to hear back from SMC on this.
Angel A4
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Angel Fly
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Angel G7
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Angel GAT
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
Angel A1
Feedneck Thread = M21x0.75
LPR & Battery Caps Thread = M19x0.75
WGP
Cocker (1999 and under)
Cocker (2000+)
Cocker Trigger Frames
E-Blade
Sear Solenoid = Emessem 9954/0312 9VDC-PD (purchase from MSA, this part number INCLUDES the pigtail connector)
E1/E2 Board Mount Screw Threads = M2.5 or M1.5 <----depends on the year the frame was made
Ego
Board Mount Screw Threads
Depends on year of frame:
2005 Star Frames = M1.5
2006 Star Frames =
LCD Screen of the 05 Board = UMS-7449FD-1B
Manuals For Aftermarket Boards
Predator Morlock 2007 w/ 10.0 Code
http://img2.putfile.com/thumb/1/322193744.jpg (http://www.putfile.com/pic.php?img=7418271)
Break Beam Eye Component Wiring
http://img2.putfile.com/thumb/1/415103723.jpg (http://www.putfile.com/pic.php?img=7424319)