SummaryJudgement's pics.....

[SummaryJudgement]

http://img1.putfile.com/thumb/3/6415443838.jpg (http://www.putfile.com/pic.php?img=4922587)

http://img1.putfile.com/thumb/3/6415443633.jpg (http://www.putfile.com/pic.php?img=4922585)

http://img1.putfile.com/thumb/4/9403050955.jpg (http://www.putfile.com/pic.php?img=5148345)

http://img1.putfile.com/thumb/4/9403050535.jpg (http://www.putfile.com/pic.php?img=5148337)

http://img1.putfile.com/thumb/4/9403051093.jpg (http://www.putfile.com/pic.php?img=5148348)

Alas, I have parted with some of these in the last couple of years. Most notably, the Shark-Attack X-mag. Life goes on.....

More pics to come if I can get the camera to play nice.

EDIT: ADDED PICS ON 1/13/08

Forgive the pic quality. Special thanks to XMT for seeting this up for me. I bought his lowers (awesome lowers) and added the Tuna CNC pack. That was his X-valve too. It's a great set-up. It looks good now, but it's definately still in "project" mode. Polish and anno are probably a while off. The body seems really nice. I don't think the pics have enough detail. You can see alot of the milling patterns in the metal and I think it looks really good up close. It isn't rough machining by any means, but hasn't seen any polish work at all.

http://img2.putfile.com/thumb/1/1103572667.jpg (http://www.putfile.com/pic.php?img=7468228)

http://img2.putfile.com/thumb/1/1103572658.jpg (http://www.putfile.com/pic.php?img=7468227)

http://img2.putfile.com/thumb/1/1103572690.jpg (http://www.putfile.com/pic.php?img=7468226)

http://img2.putfile.com/thumb/1/1103572645.jpg (http://www.putfile.com/pic.php?img=7468225)

Tuna CNC pack :dance:

http://img2.putfile.com/thumb/1/1103572688.jpg (http://www.putfile.com/pic.php?img=7468224)

[A-Tach-One]

Nothin but sweetness in there!!:2ar15:

[BigEvil]

Hey where are all of your cockers? Your holding out on us!!

[SummaryJudgement]

Hey where are all of your cockers? Your holding out on us!!

http://img1.putfile.com/thumb/4/10216301984.jpg (http://www.putfile.com/pic.php?img=5215970)

http://img1.putfile.com/thumb/4/9403141426.jpg (http://www.putfile.com/pic.php?img=5148418)

http://img1.putfile.com/thumb/4/9403140543.jpg (http://www.putfile.com/pic.php?img=5148399)

http://img1.putfile.com/thumb/4/9403141132.jpg (http://www.putfile.com/pic.php?img=5148412)

http://img1.putfile.com/thumb/4/9403140287.jpg (http://www.putfile.com/pic.php?img=5148391)

http://img1.putfile.com/thumb/3/7117361591.jpg (http://www.putfile.com/pic.php?img=4976194)

http://img1.putfile.com/thumb/3/6415443793.jpg (http://www.putfile.com/pic.php?img=4922586)
Gina!

There has been a fair amount of part-swapping for a while, so these pics aren't the most up to date. I just realized how much stuff I don't have pics of yet. I'll work on it some.

:cheers:

[nmib]

NICE! Is that spacemag lowers?

[SummaryJudgement]

NICE! Is that spacemag lowers?

Thanks! And yes they are :wthumpup:

[SummaryJudgement]

Nothin but sweetness in there!!:2ar15:

Thanks man!

Praise from Caesar..........:cheers:

[t0nnn]

that kapp flame is sickkkkk!!

[Lasrsktr]

reply to the PM i sent you..

You said you wanted to play... lets play.

[ThePixelGuru]

http://img1.putfile.com/thumb/3/6415443633.jpg (http://www.putfile.com/pic.php?img=4922585)
I don't think I'm alone when I say that a backstory on that Spacemag would be nice. Is that an original or a remake? Who made it? You can't just post a gem like that and expect not to be pestered with questions. :D

[warbeak2099]

I think it's a remake by Doc Nickel.

[Lasrsktr]

That is a doc's remake of the Space mag.

Beautiful piece... the trigger frame is quite comfortable... now only if it were a double.

[FiXeL]

That is a very respectable collection, nice! :wthumpup:

[SummaryJudgement]

That is a doc's remake of the Space mag.

Beautiful piece... the trigger frame is quite comfortable... now only if it were a double.

Yeah guys. I guess I should have given a little more detail for some of these pics. It is on eo fthe three Spacemag re-makes that Doc did. It clearly isn't one of the originals. As lasrsktr mentioned, it is very comfortable in your hand. I wish it was a double-trigger frame myself too. Also, since the frame is milled from a single piece, there is no interior to the grip frame at all. If you wanted to pneu it I guess you could have someone remove a whole bunch of material from the inside and add panels, but then I don't think it would feel the same.

Lasrsktr: I replied to your PM :wthumpup:

FiXel: Thanks man!

[SummaryJudgement]

Additions 1/5/08

http://img2.putfile.com/thumb/1/501410185.jpg (http://www.putfile.com/pic.php?img=7427150)

http://img2.putfile.com/thumb/1/501410189.jpg (http://www.putfile.com/pic.php?img=7427149)

http://img2.putfile.com/thumb/1/501410146.jpg (http://www.putfile.com/pic.php?img=7427148)

http://img2.putfile.com/thumb/1/501410166.jpg (http://www.putfile.com/pic.php?img=7427147)

http://img2.putfile.com/thumb/1/501410073.jpg (http://www.putfile.com/pic.php?img=7427146)

http://img2.putfile.com/thumb/1/501410054.jpg (http://www.putfile.com/pic.php?img=7427145)

Enjoy guys!

[AirAssault]

Nice mix, love the cockers. :cheers:

[Altec]

Great collection! Not only a large one, but A LOT OF nice markers!

If you ever wanna get rid of one of these two, let me know! Not right now though. I have no moneys.

http://www.putfile.com/pic.php?img=5148418
http://www.putfile.com/pic.php?img=5148391

[SummaryJudgement]

Altec-

Those are actually two guns I don't plan to part with soon ;) You do have good taste though :wthumpup:

Updated the first post with Phoenix E-mag pics. Enjoy guys!

[p8ntbal4me]

I got a Red Micro Cocker JUST like that one you got!:wthumpup:

But right now mine is getting an MQ2 and an E1 with some ND settings on it:clap:


,.... and no,.. the body WILL NOT be drilled for eyes!

~ p8nt

[xjerzy09]

http://img1.putfile.com/thumb/3/6415443838.jpg (http://www.putfile.com/pic.php?img=4922587)

http://img1.putfile.com/thumb/3/6415443633.jpg (http://www.putfile.com/pic.php?img=4922585)

http://img1.putfile.com/thumb/4/9403050955.jpg (http://www.putfile.com/pic.php?img=5148345)

http://img1.putfile.com/thumb/4/9403050535.jpg (http://www.putfile.com/pic.php?img=5148337)

http://img1.putfile.com/thumb/4/9403051093.jpg (http://www.putfile.com/pic.php?img=5148348)

Alas, I have parted with some of these in the last couple of years. Most notably, the Shark-Attack X-mag. Life goes on.....

More pics to come if I can get the camera to play nice.

EDIT: ADDED PICS ON 1/13/08

Forgive the pic quality. Special thanks to XMT for seeting this up for me. I bought his lowers (awesome lowers) and added the Tuna CNC pack. That was his X-valve too. It's a great set-up. It looks good now, but it's definately still in "project" mode. Polish and anno are probably a while off. The body seems really nice. I don't think the pics have enough detail. You can see alot of the milling patterns in the metal and I think it looks really good up close. It isn't rough machining by any means, but hasn't seen any polish work at all.

http://img2.putfile.com/thumb/1/1103572667.jpg (http://www.putfile.com/pic.php?img=7468228)

http://img2.putfile.com/thumb/1/1103572658.jpg (http://www.putfile.com/pic.php?img=7468227)

http://img2.putfile.com/thumb/1/1103572690.jpg (http://www.putfile.com/pic.php?img=7468226)

http://img2.putfile.com/thumb/1/1103572645.jpg (http://www.putfile.com/pic.php?img=7468225)

Tuna CNC pack :dance:

http://img2.putfile.com/thumb/1/1103572688.jpg (http://www.putfile.com/pic.php?img=7468224)

I've been to pro shops that didnt have that many markers. **envious**

[MINI MAN]

Canit go rong with a crap load of mags


:minigun: