muy bonita?

[jakeman7676]

Well here she is. What do you think?
Also, should I pneu it?

http://i107.photobucket.com/albums/m294/jakeman7676/DSCN1097.jpg

http://i107.photobucket.com/albums/m294/jakeman7676/DSCN1100.jpg

[Iceman]

...should I pneu it?

Of course...

:minigun:

[jakeman7676]

lol Well whats a good lpr to use as a front grip. I want it to be a sleeper but I also don't want to spend a zillion dollars on a palmers fatty or something. Maybe a used one for cheap. Any suggestions?

[jakeman7676]

Sorry it woln't let me edit.

Can I use my classic valve if I pneu it or will I have to get a RT/X valve?

[FiXeL]

Sorry it woln't let me edit.

Can I use my classic valve if I pneu it or will I have to get a RT/X valve?

I would try it with the classic valve first. If it doesnt work out that great, you can always get a RT/X.

Sweet mag btw. :wthumpup:

[Cyberave68]

Sorry it woln't let me edit.

Can I use my classic valve if I pneu it or will I have to get a RT/X valve?

Yes you can use your classic valve. You will need to get a RT on/off assembly though. The stock on/off will choke ALOT at a higher rate of fire.

Nice mag BTW.....

[bread_da_painter]

nice mag... i like the dye foregrip, had one before and rally like the look....:cheers:

[robnix]

Very nice. I love the ano on the rail.

[jakeman7676]

Thanks for the compliments guys. :cheers:
Any suggestions on a good, preferably cheap, lpr to use as a foregrip when I pneu it? I was thinking of either copying rawbutter's setup (if he doesn't mind) or trying to mount a tickler or something in the grip frame. Is there room in the y-frame to do the second option?
Any other comments or suggestions are very much appreciated.

[Practice Target]

You can use a Palmers Fatty which is what rawbutter has done this was first done by Pneumagger himself but since replicated by Lasrsktr and rawbutter.

I have also seen where Dyeforever used a remote adapter into the vert asa and screwed a Palmers Micro Rock into using the Micro Rock as a foregrip.

Dyeforever also had used a Y grip.

The y grip will not have enough room in it to fit the lpr.There is barely enough room for the pneumattic parts to fit.

Hope this answers your questions.

[jakeman7676]

You can use a Palmers Fatty which is what rawbutter has done this was first done by Pneumagger himself but since replicated by Lasrsktr and rawbutter.

I have also seen where Dyeforever used a remote adapter into the vert asa and screwed a Palmers Micro Rock into using the Micro Rock as a foregrip.

Dyeforever also had used a Y grip.

The y grip will not have enough room in it to fit the lpr.There is barely enough room for the pneumattic parts to fit.

Hope this answers your questions.


Yea a fatty was going to be my first choice but I didn't know if there were any cheaper alternatives. $90 is pretty expensive and then I still have to buy the parts kit for $40.

If Pneumagger, Rawbutter, or Lasrsktr have any words of advice or instructions I'd be more than happy to hear it.

[skyguy]

Those ANS ones are usually pretty cheap when you find them and it would go with you're chromed out theme. What I really was lookin at was those trilogy micro rocks, if you could make a sleek vertical mount for one that would look real cool.

[jakeman7676]

http://www.ansxtreme.com/SearchResults.asp?Cat=137
Those?
Are they any good?

[t0nnn]

you could always put your LPR off the second port of your asa....The ANS Jackhammer's are cheap and good.

Check this link out, Barbs Paintball sells them for a great price.

http://search.stores.ebay.com/Barbspaintball_ans_W0QQfcdZ2QQfciZQ2d1QQfclZ3QQfrt sZ60QQfsnZBarbspaintballQQfsooZ1QQfsopZ1QQsaselZ24 4905077QQsofpZ0

[jakeman7676]

you could always put your LPR off the second port of your asa....The ANS Jackhammer's are cheap and good.

Check this link out, Barbs Paintball sells them for a great price.

http://search.stores.ebay.com/Barbspaintball_ans_W0QQfcdZ2QQfciZQ2d1QQfclZ3QQfrt sZ60QQfsnZBarbspaintballQQfsooZ1QQfsopZ1QQsaselZ24 4905077QQsofpZ0

Meh, not really what I'm looking for. I'd rather have it hidden as a foregrip or inside the y-frame (which is apparently impossible).
Anybody have a palmers fatty they don't want?

[skyguy]

no, I'm thinking of the ones that look like AA uniregs but are aluminum and I've seen em as cheap as like 15 bucks used, and would be plenty good enough for a puemag lpr if you put in a lp spring. For that matter, I'd assume you like the stainless by the looks of it and weight prolly isn't a huge issue for you, you could prolly find a unireg for $30 or so...

edit: here, I found pictures of Cyberthugs on PBN, I've seen these regs go for $15 on boards, 20 on ebay, goes all the way down to zero and has input on both sides, so it'd definitely do the job, plus it comes in chrome

http://img.photobucket.com/albums/v227/shapeshifters/DSCF0150.jpg

http://img.photobucket.com/albums/v227/shapeshifters/DSCF0152.jpg

[jakeman7676]

Dang thats ugly. lol
I do like the price though, I'll keep it in mind.

[SummaryJudgement]

Looks nice and clean!

You could always have a taller feedneck though...............:wthumpup:

[jakeman7676]

Looks nice and clean!

You could always have a taller feedneck though...............:wthumpup:

haha, I'd prefer the low rise twist lock body but they are a whole lot more expensive and harder to find. Maybe after I pneu it who knows.

[Iceman]

I was thinking of either copying rawbutter's setup (if he doesn't mind)

Alright... time for the disguise to come off. I am actually rawbutter. :glare: I always hated that name on AO, but Iceman was already taken. If you want proof, just lookie here (http://www.pblegion.com/showthread.php?t=718).

And like it's been said, I copied most of my setup from pneumagger. But yes... you may copy the whole thing if you want.

With that said, I really love having a fatty stabilizer (or another reg) as the LPR for my pneumag. I love the look of it, and the ease of setting it up and making adjustments. I do actually like skyguy's suggestion, but I could see how the how the aesthetics could be.... well... lacking in certain areas.

You could use a regular Palmer's stabilizer (http://cgi.ebay.com/New-Palmers-Stabilizer-regulator-paintball-marker_W0QQitemZ250201145743QQihZ015QQcategoryZ362 85QQssPageNameZWDVWQQrdZ1QQcmdZViewItem). (You don't really need the low pressure kit... although it is nice.)

Or you could use a Sidewinder reg (http://cgi.ebay.com/AKA-SideWinder-Reg-Medium-Silver_W0QQitemZ230205885768QQihZ013QQcategoryZ871 19QQrdZ1QQssPageNameZWD1VQQcmdZViewItem?_trksid=p1 638.m118)... or a Torpedo reg (http://cgi.ebay.com/Bob-Long-Intimidator-Torpedo-Regulator_W0QQitemZ270200403467QQihZ017QQcategoryZ 87119QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)... The possibilities are really endless. Anything on this page (http://www.pbreview.com/products/cat/49/)could possibly work. As long as it's a good LPR with a side input (not a bottom input), then you can get a T fitting and make it work.

I know money is always an issue, but I would advise that you be patient and wait until you can spend the money wisely to do it right. A pneumag is not something you want to cut corners on.

[skyguy]

You could use a regular Palmer's stabilizer (http://cgi.ebay.com/New-Palmers-Stabilizer-regulator-paintball-marker_W0QQitemZ250201145743QQihZ015QQcategoryZ362 85QQssPageNameZWDVWQQrdZ1QQcmdZViewItem). (You don't really need the low pressure kit... although it is nice.)


Definitely watch that auction, it's a chrome fatty but it's labeled as just a stabilizer. That's a 89 dollar reg that prolly will sell a bit cheaper than msrp.

[jakeman7676]

Thanks Iceman that post helped alot. I'll definatly keep my eyes on that fatty.

[mongoose]

i have no problems with a tickler...and they are small!

[jakeman7676]

Yea, I've heard good things about them but I don't want the lpr to be hanging off the front of my vert asa or anywhere that is very noticeable. I want people to be surprised. :D

Also, I missed that fatty on ebay. I was at a friends house all day today and didn't get home untill the auction was over. :(
I'll keep looking.