stock class feed tube

[camocj5]

Im wanting to assemble a mag pistol, but not sure how I can attach a stock class feed tube to a mag body. If anybody can offer advice, I would greatly appreciate it.
Thanks

[ThePixelGuru]

I think it depends on which 'mag body. What've you got?

[DevilMan]

I agree with TPG... What body are you working with???

On my mag pistol it's on a classic left/right feed body... And all I use is the feed gate from my phantom.

:D

I may put pics up later...

DM

[mr doo doo]

hum... id like to see Devilman.

On my pistol mag (powerfeed right), i use a 90* warp adapter, than a PVC coupling (1/2"). Had to sand down one side to fit the 90* warp adapter, but it fits a 10 round tube alright. After painting it, this is what you get:

http://i149.photobucket.com/albums/s49/mistahchao/DSC03424.jpg

[camocj5]

Right now I have a left powerfeed body, but if I need something else to finish this project, I will get it.
Pics would be great DM. Mr doo doo, I saw one like yours on legion, might have been yours, gave me the interest in this project.

[mr doo doo]

well, havent posted this picture yet on PBLegion so i dont think it was mine... but otherwise, good luck with your project! glad i was of some help.

if you get a pistol mag up and running, you wont believe the comments you get on the field. well, at least i was stunned on the comments i got ;)

[Papa_Smurf]

hum... id like to see Devilman.

On my pistol mag (powerfeed right), i use a 90* warp adapter, than a PVC coupling (1/2"). Had to sand down one side to fit the 90* warp adapter, but it fits a 10 round tube alright. After painting it, this is what you get:

http://i149.photobucket.com/albums/s49/mistahchao/DSC03424.jpg


I have a pile of adapters exactly like this one if you need one.

[doc Zox]

The PTP warp adaptors work well:
http://premium1.uploadit.org/docZox/PB/tacmag01.jpg
It mounts up on a classic warp body

heres a pump mag with a CCI style gate:
http://premium1.uploadit.org/docZox/PB/pumpmag.jpg
Its not my set up, I gather there is a threaded fitting that holds the assembly in place

[camocj5]

The pump mag looks as though there isn't a gap between the feed gate and the body, might have to be attached a little more permanent than threaded fitting. I like the way it looks, very clean. Might have to look for a vert feed body for another go at one.
Papa, have any idea what you would want for one of those adaptors?

[mr doo doo]

man doc, your little stock class mag looks legit! with the AGD quick changer (i think AGD) and the scope and stuff, man, i like it :wthumpup: besides the PTP adapter, how are you able to use a CCI feedtube?

Dont remember who was selling that red/black acid washed pump mag, but the phantom-like feeding is getting popular with pump mags using ULE bodies. It DEFINITELY looks clean since there is no gap between it and the body, but what concerns me is the life of the threads that mount the feedgate; the ULE body is pretty thin, so probably 3-4 threads. and if i ever wanted to switch to open class, there would be a hole there too :eek:

[Sumthinwicked]

small hole and to be honest many see it ;P i have done a few they came out nice just have to be carefull

[AirAssault]

Papa, have any idea what you would want for one of those adaptors?
ditto.

[doc Zox]

i bought the feed on ebay

its a stack of nested feed necks that the CCI gate slides right on to:
http://premium1.uploadit.org/docZox/PB/tacmag01.jpg
http://premium1.uploadit.org/docZox/PB/tacmag02.jpg
http://premium1.uploadit.org/docZox/PB/tacmag03.jpg
http://premium1.uploadit.org/docZox/PB/tacmag04.jpg
http://premium1.uploadit.org/docZox/PB/tacmag05.jpg

[doc Zox]

this one was on ebay last year:
http://premium1.uploadit.org/docZox//5b_12.JPG.jpg

you can also mod a pistol mag to work:
http://premium1.uploadit.org/docZox//hzagd.jpg