BigEvil
01-01-2008, 04:10 PM
I picked this old girl up off of Ebay about 2 years ago. It has found its way on and off of the work bench at various times as the mood has hit me.
It actually took me a while to track down the various pieces. The valve tool and velocity adjuster were particularly tough.
I had the Cooper T bolt and the muzzle break. I attempted to mod one of those crappy plastic cocker slider frames to the gun. However, after about 1/2 a day of use, the stupid thing cracked. I found someone on MCB that makes that nifty little adapter bracket, so I was able to bolt up an aluminum slider fairly easy. The trigger plate took about 5 minutes of dremel work to get the sear to sit up high enough to get along with its new friend - the Sheridan hammer.
I also drilled and tapped out the hard line to the valve and replaced it with a standard macro fitting.
http://www.bigevilonline.com/modules/coppermine/albums/userpics/10002/normal_IMG_3866.jpg
It actually took me a while to track down the various pieces. The valve tool and velocity adjuster were particularly tough.
I had the Cooper T bolt and the muzzle break. I attempted to mod one of those crappy plastic cocker slider frames to the gun. However, after about 1/2 a day of use, the stupid thing cracked. I found someone on MCB that makes that nifty little adapter bracket, so I was able to bolt up an aluminum slider fairly easy. The trigger plate took about 5 minutes of dremel work to get the sear to sit up high enough to get along with its new friend - the Sheridan hammer.
I also drilled and tapped out the hard line to the valve and replaced it with a standard macro fitting.
http://www.bigevilonline.com/modules/coppermine/albums/userpics/10002/normal_IMG_3866.jpg