TAG/Predator Morlock Manuals

[p8ntbal4me]

TAG/Predator Morlock Manuals

Anyone have the first gen morlock, as well as the 5.0 and 10.0 manuals?

Need it to make a database and build parts/manuals.

~ P8nt

[p8ntbal4me]

Anyone got the manuals or install guides?????

[Papa_Smurf]

i have a scrap of paper on how to set the firing modes. want that?

[p8ntbal4me]

i have a scrap of paper on how to set the firing modes. want that?


Look here at the bottom of the page and see if this manual is different than the one you have. (http://www.pblegion.com/showthread.php?t=861)

Im trying to get all the info collected as I can,... I got the 10.0 manual,.. looking for the others.

~ P8nt

[Mind'sEye]

That manual is the latest from Predator Electronics (which I can no longer get to). The follow are links to manuals we have used in the past for the Mini Morlock and the first Predator Morlock:

http://www.exarin.com/products/morlockman.html

http://www.zdspb.com/tech/km2board/predmorlockmanual.html

[Papa_Smurf]

Look here at the bottom of the page and see if this manual is different than the one you have. (http://www.pblegion.com/showthread.php?t=861)

Im trying to get all the info collected as I can,... I got the 10.0 manual,.. looking for the others.

~ P8nt

Yeah same thing. Sorry I can't help.

[p8ntbal4me]

Yeah same thing. Sorry I can't help.

No,.. thats okay!

Point of these smaller threads is good to work with the search engines as people need this info,.. they can see that PBL keeps comming up with search results as the place to get the answers.

Right now Im wiring up an Angel IR3 with eyes (just milled em), so all that wiring info will be on that page as well!

Its nice to have one post with EVERYTHING you could need to know about a marker you want to work on.

~ P8nt

[Papa_Smurf]

No,.. thats okay!

Point of these smaller threads is good to work with the search engines as people need this info,.. they can see that PBL keeps comming up with search results as the place to get the answers.

Right now Im wiring up an Angel IR3 with eyes (just milled em), so all that wiring info will be on that page as well!

Its nice to have one post with EVERYTHING you could need to know about a marker you want to work on.

~ P8nt

You do milling too? We should start a thread with pictures of some of our work.

[p8ntbal4me]

You do milling too? We should start a thread with pictures of some of our work.

Milling? Me? Not really.

I have a drill press with a compund milling table mounted to it and 2 vices.

I can do things like milling out a drip frame, or for this project,... cutting the eye routes and doing the eye holes. I do have 2 sets of mill bits I bought a year ago,.. they do the trick.

I dont do the fancy/pretty stuff.

~ P8nt

[Papa_Smurf]

Milling? Me? Not really.

I have a drill press with a compund milling table mounted to it and 2 vices.

I can do things like milling out a drip frame, or for this project,... cutting the eye routes and doing the eye holes. I do have 2 sets of mill bits I bought a year ago,.. they do the trick.

I dont do the fancy/pretty stuff.

~ P8nt

Oh, ok, well I may still start a thread and you can post up some stuff too.

I have 300+ end mills if you want some more.

[p8ntbal4me]

Oh, ok, well I may still start a thread and you can post up some stuff too.

I have 300+ end mills if you want some more.

Previous owner tried to do the TAG diverter plate mod to this IR3 I have.

They left a tap & a drill bit from what I can tell in the bottom of the gun.

Ive spent 3 drill bits, 1 mill bit (destroyed) to get the air pass correct.
Now the JB Weld is dry and it doesnt leak and I can finally run my eyes through.

The mill bits I got were $100 and I have 20 in the set I use here at the house. I dont think they are of good quality anyways,.. but it gets me there.

~ P8nt