Mag Aluminum Bodies

[A-Tach-One]

This is a Master List of Mag Aluminum bodies that I have put together for PBLegion that have hit the market in the past.


DeadlyWind Karta Body*

EMag length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detent)
Barrel Threads: Cocker
Body Rail: Yes - Matching - Holes


-----------------------------------------------------------------------------------

DeadlyWind Karta body (Hole less)*

EMag length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detent)
Barrel Threads: Cocker
Body Rail: Yes - Matching - No Holes


--------------------------------------------------------------------------------

DeadlyWind Karta Body (RPG Version)*

EMag length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detent)
Barrel Threads: Cocker
Body Rail: Yes - Matching - No Holes
Milled to accept RPG Subzero Feednecks


------------------------------------------------------------------------------------

DeadlyWind Dallara Body (Dimpled Body)*
Dimpled version is less common than the non dimpled bodies.

AM/MM length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detent)
Barrel Threads: Cocker
Body Rail: Yes - Matching


----------------------------------------------------------------------------------

DeadlyWind Dallara Body (No Dimples)*

AM/MM length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detent)
Barrel Threads: Cocker
Body Rail: Yes - Matching


-------------------------------------------------------------------------------------

DeadlyWind Chord V1 Body*

AM/MM length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detent)
Barrel Threads: Cocker
Body Rail: No


----------------------------------------------------------------------------------

DeadlyWind Chord V2 Body*

AM/MM Length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detent)
Barrel Threads: Cocker
Body Rail: No

-----------------------------------------------------------------------------------

DeadlyWind Chord V2 Body (RPG Version)*

Emag length & AM/MM length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detent)
Barrel Threads: Cocker
Body Rail: No
Milled to accept RPG Subzero Feednecks


----------------------------------------------------------------------------------

RPG Exile Body*

Emag length
Feedneck Threads: Angel
Detent Threads: Angel (2 versions, 1st Single Detent, 2nd Dual Detent)
Barrel Threads: Cocker
Body Rail: No

----------------------------------------------------------------------------------

RPG Pariah Body*

AM/MM length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detent)
Barrel Threads: Cocker
Body Rail: No

----------------------------------------------------------------------------------

[A-Tach-One]

AGD Tac-One Body*

Emag length
Feedneck Threads: Angel
Detent Threads: Angel
Barrel Threads: Cocker
Body Rail: Yes - Matching


----------------------------------------------------------------------------------

AGD Tac-One Warp Body*

Emag length
Feedneck Threads: Angel
Detent Threads: Angel
Barrel Threads: Cocker
Body Rail:


http://s177.photobucket.com/albums/w...P1010011_1.jpg
---------------------------------------------------------------------------------

Tac-One Body (RPG Version-Mini Tac)*

AM/MM Length
Feedneck Threads: Angel
Detent Threads: Angel (Dual Detents)
Barrel Threads: Cocker
Body Rail: Yes - Matching


-------------------------------------------------------------------------------------

AGD ULE Body *

Emag length
Feedneck Threads: Angel
Detent Threads: Angel
Barrel Threads: Cocker
Body Rail: No


----------------------------------------------------------------------------------

AGD ULE Warp Body *

Emag length
Feedneck Threads: Angel
Detent Threads: Angel
Barrel Threads: Cocker
Body Rail: No


----------------------------------------------------------------------------------

ProTeam Products Micromag Gen1 Body:

Circa 92/93
AM/MM Length
Feedneck Threads: Single screw retaining the Powerfeed
Detent Threads: Bolt on plastic ball detent
Barrel Threads: Fixed shorty Barrel
Uni-Body


----------------------------------------------------------------------------------

ProTeam Products Micromag Gen2 Body:

Circa Late 1994/early 1995
AM/MM Length
Feedneck Threads: Powerfeed
Detent Threads: Nubin
Barrel Threads: Cocker Barrel
Uni-Body

----------------------------------------------------------------------------------

ProTeam Products Micromag Gen3 Body:

Circa 96 - 97
AM/MM Length
Feedneck Threads: Powerfeed
Detent Threads: Nubin
Barrel Threads: Cocker Barrel
Uni-Body

----------------------------------------------------------------------------------

ProTeam Products Micromag Gen4 Body:

Circa 2000 - 2001
AM/MM Length
Feedneck Threads: Powerfeed
Detent Threads: Nubin
Barrel Threads: Cocker Barrel
Uni-Body has wing over top of valve


---------------------------------------------------------------------------------

Proteam Products Micromag 2000 body:
AM/MM length
Feedneck Threads: Pressfit
Detent Threads: nubbin
Barrel Threads: Cocker
Uni-Body


----------------------------------------------------------------------------------

Proteam Products Micromag 2000 body Special Edition:
AM/MM length
Feedneck Threads: cocker
Detent Threads: nubbin
Barrel Threads: Cocker
Uni-Body

http://img515.imageshack.us/img515/9...mag200body.jpg
----------------------------------------------------------------------------------



Xtreme Depot I.T. Body:

AM/MM length
Feedneck Threads: Angel
Detent Threads: Cocker (Dual Detent)
Barrel Threads: Cocker
Body Rail: No

----------------------------------------------------------------------------------

Galactic Systems Z-Body:

AM/MM Length
Feedneck Threads: Powerfeed
Detent Threads: Cocker
Barrel Threads: Cocker
Body Rail: No


-----------------------------------------------------------------------------------

TVL V2 Or Boxer:

Feedneck Threads: Removable Powerfeed
Detent Threads: ?
Barrel Threads: Twist lock
This was a body milled and sold in Europe.

http://img124.imageshack.us/img124/6854/tvlbody.jpg
-------------------------------------------------------------------------------



XMT Ripper
Emag Length
Feedneck Threads: Angel
Detent Threads: Angel
Barrel Threads: Cocker
Body Rail: Yes - Matching
Matching rails were offered at a later time. Only a couple purchased the rail.
http://img32.imageshack.us/img32/6206/ripperrail.jpg
-----------------------------------------------------------------------------

XMT Pheonix
Emag length
Feedneck Threads: Angel
Detent Threads: Angel
Barrel Threads: Cocker
Body Rail: Yes - Matching
http://img134.imageshack.us/img134/4236/pheonixrail.jpg
------------------------------------------------------------------------------

XMT Shockwave
Emag Length
Feedneck Threads: Angel
Detent Threads: Angel
Barrel Threads: Cocker
Body Rail: Yes - Matching
There is at least 1 uni body version out there.
-----------------------------------------------------------------------------

Micromag Clone bodies:
Feedneck Threads:?
Detent Threads: ?
Barrel Threads: ?
--------------------------------------------------------------------------------

Xmag Body

Emag Length
Feedneck Threads: Pressed fit
Detent Threads: Angel
Barrel: Cocker
Unibody
The body kits themselves were only available in Europe. Otherwise you had to purchase an entire XMag to get this body.
http://img463.imageshack.us/img463/138/x350cont9kc.jpg
--------------------------------------------------------------------------------------

SFL EMag
Emag Length
Feedneck Threads: Pressed fit
Detent Threads: Angel
Barrel: Cocker
Unibody
These were only available as a whole marker. Bodies were not sold separately. About 35 total made.
http://img159.imageshack.us/img159/4396/4sfls004ev7.jpg

--------------------------------------------------------------------------------------

AGD Slug Body

Emag Length
Feedneck Threads: Angel
Detent Threads: None
Barrel Threads: Cocker
http://img168.imageshack.us/img168/6...ilcomboat0.jpg
--------------------------------------------------------------------------------


There have been a few one off bodies milled from a sluggo body.



* shows the bodies were milled from AGD slug bodies.




Please contact me if any of the info is incorrect. This is a work in progress list. Thank you. - Eric

[A-Tach-One]

One off bodies:

Milled from AGD Slug

-------------------------------------------------------------------------------------


Festus Body 1 of 2 (Festus was an AO member) Milled from AGD Slug

-------------------------------------------------------------------------------------


Bling Bling Products Body 1 of 1 (Detroit of BBP was an AO member)

-------------------------------------------------------------------------------------

[georgeyew]

You seem to have left out the Phoenix bodies.

[A-Tach-One]

Originally Posted by georgeyew

You seem to have left out the Phoenix bodies.

Good call. Any idea how big of a production that was?

[sandfreestyle]

Also forgot the Rippers and Shockwave. I don't know the numbers for rippers but the shockwave was only a small run of under 5. More like3.

[A-Tach-One]

Originally Posted by sandfreestyle

Also forgot the Rippers and Shockwave. I don't know the numbers for rippers but the shockwave was only a small run of under 5. More like3.

Ah, didn't think of those either. Do you know what XT's shop name is?

[sandfreestyle]

Most everyone refers to him as XMT and that's pretty much how they label the bodies

[pbpixels]

should you show the holeless vs. holy karta bodies and the difference between the Deadlywind and the Rogue version?

[A-Tach-One]

Originally Posted by pbpixels

should you show the holeless vs. holy karta bodies and the difference between the Deadlywind and the Rogue version?

Yeah, I planned on putting that info in there. Thanks.

[A-Tach-One]

Working on finding more pics. Comin along though.

[Thanna]

Does the ProTeam Products MicroMag 2009 body count yet?

[Mann]

Originally Posted by Thanna

Does the ProTeam Products MicroMag 2009 body count yet?

I have yet to see one. Are they finished?

[A-Tach-One]

Originally Posted by Thanna

Does the ProTeam Products MicroMag 2009 body count yet?

It will go up on the list as soon as they are in people's hands. Except for the one off's, the list consists of bodies that have been released.

[Zondo]

I think you should add a new line for "Special Features". For example:

Galactic Z
Special feature: adjustments to place spin on the ball to curve down field.

Also, I'd vote for these threads to be sticky's so they are not lost for future generations

[A-Tach-One]

Originally Posted by Zondo

I think you should add a new line for "Special Features". For example:

Galactic Z
Special feature: adjustments to place spin on the ball to curve down field.

Also, I'd vote for these threads to be sticky's so they are not lost for future generations

Well the special feature line would really only apply to the Z body. I have an idea of what I want to add to these threads but it will take some time. Keep the suggestions coming if you got em. I agree with the sticky comment.

[ajnin]

dont forget the micromag clones.

And isnt there another square body? I may be thinking of the colonials, but I dont think so, of course I cannot find a pic.

[A-Tach-One]

Originally Posted by ajnin

dont forget the micromag clones.

And isnt there another square body? I may be thinking of the colonials, but I dont think so, of course I cannot find a pic.

Thank you. Yeah, that body was the TVL V2 or Boxer milled and sold in Europe. Once you mentioned another square body I immediatly thought of something Peppermill had said and looked up his posts.

[ajnin]

And it was automag, not colonial?


ohhh the pic hunt begins....

[Mann]

doh I have another body. A ptp micromag body circa 2003 it was after the 2000 bodies. It was the one with the threaded feedneck (autococker). If you don't have pics I will take a few of mine. Just lmk if you would rather the body separate or on a marker.